Artson Fashion · Style guide

How to iron a shirt and fold it: the right order step by step

Man folding a white shirt; an iron stands safely upright beside the work area.

Iron a shirt in a fixed order: first the collar, then the yoke, the cuffs, the sleeves, the back and finally the front panels. Iron at the temperature on the label, usually high for cotton, while the shirt is still slightly damp or with steam. Then hang it on a hanger straight away and close the top button.

In short

  • Iron a slightly damp shirt or use steam.
  • Order: collar, yoke, cuffs, sleeves, back, front panels.
  • Choose the temperature according to the label and fabric.
  • Hang the shirt up straight away and close the top button.
  • For a suitcase, fold the shirt around a stiff piece of card or paper.

Last updated:

Ironing temperature by type of shirt
FabricIron setting (follow the label)Tip
CottonHigh, three dotsIron slightly damp or with steam
LinenHigh, three dotsIron quite damp, inside out for dark colours
Cotton with elastaneMedium, two dotsDo not stay on one spot too long
Non-iron cottonMediumOften hanging it up straight away is enough
Viscose or silkLow to mediumInside out or with a pressing cloth

How to iron a shirt: how do you prepare a shirt for ironing?

A shirt is easiest to iron while it is still slightly damp. So take it out of the washing machine or tumble dryer before it is completely dry, spray it with water or use the steam function. Check the label for the right temperature and fill the iron with water. Undo all the buttons, including those on the cuffs and collar points. Have a hanger ready so you can hang the shirt up straight away.

Ironing the collar: how do you iron the collar?

Start with the collar, as it is the most visible part. Open the collar and lay it flat, inside facing up. Iron from the points towards the middle, so you do not push small creases into the points. Turn the collar over and repeat on the outside. Then fold the collar along its fold line and press it lightly. Remove any collar stiffeners first so they do not leave an imprint.

Ironing the shoulders: how do you iron the shoulders and yoke?

The yoke is the piece of fabric at the top of the back, between the shoulders. Place one shoulder over the narrow end of the ironing board and iron from the collar towards the sleeve. Slide the shirt along and repeat on the other side. This way the shoulders become smooth without creases in the body. Take your time: a well-ironed yoke and collar make all the difference under a jacket or jumper.

Ironing cuffs and sleeves: how do you iron the cuffs and sleeves?

Iron the cuffs first on the inside and then on the outside, from the edge towards the middle. Iron double cuffs open and then fold them back. Next, lay a sleeve flat on the board with the seam straight along the bottom and iron from the shoulder to the cuff. If you do not want a crease in the sleeve, use a sleeve board or roll a towel inside the sleeve.

Ironing back and front: how do you iron the back and front panels?

Place the shirt over the board and iron the back first, from top to bottom. Then slide the shirt to the first front panel and iron around the buttons with the tip of the iron, never over them. Finish with the other front panel with the buttonholes. Iron a pleated back or a centre pleat from top to bottom, so the pleat stays in place.

Hanging a shirt: how do you hang an ironed shirt?

Hang the shirt straight after ironing on a wide hanger with rounded shoulders. Close the top button and perhaps one in the middle, so the shirt keeps its shape. Let it cool before you put it in the wardrobe, as warm, damp fabric creases again more quickly. Give it some space in the wardrobe so it is not squashed between other clothes. Take a look at our men's shirts too.

How to fold a shirt: how do you fold a shirt for a suitcase?

Button up the shirt and lay it face down. Fold one side with the sleeve towards the middle of the back and lay the sleeve down along the side seam. Do the same on the other side. Then fold the bottom up once or twice to just below the collar. A piece of card or stiff paper as a backing helps keep the shirt straight. Find more tips in our guide to packing clothes.

Smoothing a shirt without an iron: how do you smooth a shirt without an iron?

A garment steamer is a quick way to remove light creases. Hang the shirt up and move the steamer from top to bottom while keeping the fabric slightly taut. You can also hang a shirt in the bathroom during a hot shower: the steam lets light creases drop out. Non-iron shirts often just need hanging up straight after washing. Read more in our guide to steaming and airing clothes.

Frequently asked questions about ironing a shirt

Should you iron a shirt inside out?

A white or light cotton shirt can simply be ironed on the outside. Dark shirts, linen and printed fabrics are better ironed on the inside or with a pressing cloth, to avoid shiny marks. Always iron the collar and cuffs on both sides, first the inside and then the outside.

How do you avoid a crease in the sleeve?

A crease in the sleeve appears when you iron the sleeve flat right up to the edge. To avoid it, use a sleeve board or roll a towel inside the sleeve and iron all around. An existing crease usually disappears if you dampen the sleeve and iron it again without pressing on the edge.

Do you need starch for a shirt?

No, starch is not necessary. It does make the collar and cuffs firmer and gives a crisper look. Use it sparingly, as too much starch can make the fabric stiff and leave white marks on dark colours. For everyday wear, a shirt ironed properly while damp is usually more than enough.

How long does it take to iron a shirt?

With a fixed order and a slightly damp shirt, it usually takes a few minutes. The more often you do it, the faster it goes. A well-filled steam iron and an ironing board with a narrow end save time. Hang shirts up straight after washing and you will have less work.

What do you do about shiny marks on a shirt?

Shiny marks are caused by too much heat or pressure, especially on dark fabrics. Light shine sometimes disappears if you steam the area or iron it again with a damp cloth at a lower setting. Prevent them by ironing dark shirts inside out or with a pressing cloth and not staying on one spot too long.

Last updated: · Written by the Artson Fashion team, tailors since 1937

Shop this in our collection

Artson Fashion

Your style. Our selection.

Explore brands and clothing categories for women and men.

For herWomen’s brands
For herWomen’s clothing categories
For himMen’s brands
For himMen’s clothing categories

Made-to-measure suits · Personal tailoring · In-house workshop

Feeling good starts with the right fit.

A made-to-measure suit starts with you: your style, your wishes and a fit that feels right. Martine Aertgeerts guides you personally, drawing on the craftsmanship she learned from her father, master tailor Jef Aertgeerts. From our tailoring workshop in 1937 to today: three generations of family history in Haacht. Our in-house workshop carries out expert alterations, including adjustments to ready-to-wear clothing.

Explore made-to-measure suits & alterations

Wedding-party outfits · Ceremonies · Occasionwear

A special day. Entirely yourself.

A wedding, a ceremony, or a First Communion or spring celebration in the family? Explore occasionwear and wedding-party outfits for women and men: from an elegant dress or contemporary ensemble to a stylish suit. With personal advice and expert alterations in our in-house workshop.